Chapter 8 Embroidery Speed (Main Shaft Speed)
Chapter 8 Embroidery Speed (Main Shaft Speed)
In the process of embroidery, the main shaft speed of the embroidery machine will change
by computer according to the stitch length of pattern. The low speed is intended for long stitch
embroidery, whereas high speed for short stitch. However, user can set the limit speed, what is
called “SETTING LIMIT SPEED”. The highest embroidery speed can increase or decrease
within the limit speed.
The limit speed ranges from 250 rpm to 850 rpm.
The limit speed ranges from 250 rpm to 850 rpm (Some types may have difference, for
example: 1000rpm type). User can select the limit speed and don not need superabundance. For
example: in normal using is 750rpm, then set in 750rpm.
8-1 Setting the Limit Speed
This setting specifies the limit value for the highest embroidery speed.
Operation:
(1)
Press "
" key, the menu appears as following:
OTHER MANAGEMENT
⊗
SET DESIGN PARAS
②FRAME TO POINT (OPTIONAL)
ARROW：MOVE， ENTER：CONFIRM
③DESIGN RANGE,S OPERATIONS
④OFFSET
⑤SET POWER RESUME
⑥POWER RESUME
⑦SET MACHINE PARAS
⊗
COMPENSATION
⑨中文/ENGLISH/SPANISH
⑩TO SET CYCLIC EMB.
(2)
Press "
"
、
"
" or digital key "7" to move the cursor to "SET MACHINE PARAS",
and then press "
" key.
(3)
Press
“
”
to turn to the third page and select the option "MAX. SPEED", and
press "
" key.
BECS-328 Computerized Embroidery Machine's Manual
35
