Chapter 10 Disk Operations
(1)
Insert the pattern disk into floppy/USB disk driver, and press "
" key, the disk
operation menu appears as following:
DSISK MANAGEMENT
①DISK DIR
②INPUT
ARROW：MOVE， ENTER：CONFIRM
③OUTPUT(DSB)
④DEL FILE
⑤FORMAT 720K
⑥FORMAT 1.44M
⑦INSTALL LETTER LIBS
⑧DELETE LETTER LIBS
⑨DESIGN A LETTER PATTERN
⑩INPUT DESIGN FROM PC
(2)
Press "
"
、
"
" key or digital key "2" to move the cursor at "INPUT", press"
"
key.
(3)
Press "
"
、
"
" key to select the pattern (you can press "
" key to view it), and
press "
" key.
(4)
At the bottom of LCD, the computer will show the minimum available number of
pattern (recommended for use). If you use it as the new pattern number, press "
" key to
confirm, and then begins the disk reading operation. If disagreeing to use the pattern number,
press digital keys to enter the pattern number you want. In the event of having error in entering
numeral, press
"
"
key to clear it. After entering the pattern number, press "
" key for
setting. When there is any conflict between the entered pattern number and the pattern
number existed in memory, the machine will refuse to accept this entry; therefore you should
enter another pattern number and press "
" key. After the pattern number having been
proved to be correct, then begins to read the pattern from disk to memory. Upon the
completion of pattern reading, it will return to the disk operation menu.
(5)
Press "
" or "
" key to quit the disk operation.
10-3 Output Pattern from Memory to Disk
It stores the pattern in memory to disk in a binary format. Coordinating to the use of
“Input Pattern from Memory to Disk”, this function is able to complete the operation of
copying a pattern from a disk to another disk.
Operation:
(1)
Insert the pattern disk into floppy/USB disk driver, and press "
" key, the disk
BECS-328 Computerized Embroidery Machine's Manual
39
