Chapter 11 Displaying Parameters and Frame (Picture)
(2)
Press “C” to clean or press any other key to enter the second page of embroidery
information.
[DESIGN]
0
0
0
0:0:0
0
0
0
0
0:0:0
0
0
0
0
0:0:0
0
0
0
0
0:0:0
0
0
0
0
0:0:0
0
NUMBER COUNT STITCHES TIME
WORKS
12
1
21583
2:52:45
5
99
1
64
0:0:43
1
1
1
3200
1:30:18
16
0
0
0
0:0:0
0
0
0
0
0:0:0
0
The above statistics are based on software counting, and the statistics information is
based on system real time clock. The software begins counting time when doing such
operations: (1) power on the computer; (2) begin embroidering from stop state; (3) stop from
embroidering state; (4) confirm to embroider; (5) release embroidery confirmation status; (6)
finish embroidering one pattern and stop; (7) press "
" key and display embroidery statistics
information.
So, the computer omits the time between the last counting and shutting off the computer.
Items of [Embroidery] give the below embroidering statistics during the machine is on.
Total Time is the total time of embroidering time and stop time.
Emb. Time is the total time of “normal embroidering”, “low speed idling” and “high
speed idling”.
Stop Time is the time when the machine does not run.
BECS-328 Computerized Embroidery Machine's Manual
45
