Chapter 11 Displaying Parameters and Frame (Picture)
T. B. Num is the times the computer has detected thread broken when the machine is
running.
T. B. Time is the average time between each stop when thread breaks and pull bar switch
to continue embroidering.
Total Works is the total amount of patterns finished embroidering by each head during
the statistical time.
Power Num is the times of power on.
Items of [DESIGN] give the information of the last 10 designs. Attentions: if the design
number, count and accumulated stitch count are different from before, then it will be
considered to be another one and will give another information list.
Design Number is the number of the design that has been embroidered.
Design Count is the amount of normal designs within embroidering parameters.
Design Stitches are the total stitches after adding some embroidery parameters.
Time is the total time between confirmation and release of embroidering.
Works is the amount of normal designs being finished by each head.
(3)
Press "
" key to return to the main picture.
11-3 Clearing Accumulated Stitch Count and X/Y Displacement
Operation:
(1)
Press "
" key until the "Overall Stitch Count" or "X/Y Displacement" is on the
main picture.
11-4 Switching of Display Language
1.
Changing the Chinese display into English display (in Chinese display)
Operation:
(1)
Press "
" key, the menu appears as following:
BECS-328 Computerized Embroidery Machine's Manual
46
