Chapter 12 Assistant Operation and Setting the Parameters
during repetition (accuracy: 0.1mm).
(9) Y repetition distance (unit: mm)
Use digital key, "
", "
" , “
”and "
" keys to input data. Y repetition distance
presents the distance between the starting points of two adjacent patterns in longitudinal
direction during repetition (accuracy: 0.1mm).
(10) Priority modes (magnification priority or rotation priority)
Use "
", "
" and "
" keys to perform the inputting. When selecting X magnification
dissimilar to Y magnification and with rotating angle, the magnification priority and rotation
priority can give different embroidery results.
(4)
Press "
" or "
" key to end setting the parameters.
(5)
Press "
" or "
" key to go to the main picture.
12-2 Frame to Point
For details, please read the concerned part in chapter 4.
12-3 Operations of Pattern Periphery
Operation:
1. Press "
" key and the menu appears as follows:
OTHER MANAGEMENT
ARROW：MOVE， ENTER：CONFIRM
①SET DESIGN PARAS
②FRAME TO POINT (OPTIONAL)
③DESIGN RANGE,S OPERATIONS
⊗
OFFSET
⑤SET POWER RESUME
⑥POWER RESUME
⑦SET MACHINE PARAS
⑧COMPENSATION
⑨中文/ENGLISH/SPANISH
⑩TO SET CYCLIC EMB.
2. Press "
", "
" key or digital "3" to move the cursor to "DESIGN RANGE'S
OPERATIONS", and press "
" key to enter the next menu as following:
BECS-328 Computerized Embroidery Machine's Manual
50
