Chapter 12 Assistant Operation and Setting the Parameters
can be achieved.
(5)
The main picture will automatically appear after it.
12-7 Demanding whether Setup Frame Zero Point or not
Press "
" key to check whether machine setup frame ZERO POINT or not: the machine
will be displayed as “ZERO POINT:
√
” if ZERO POINT setup, otherwise the machine will
be displayed as “ZERO POINT:
×
”.
Setting frame zero point has two ways: auto ways and manual ways.
1. After auto setting frame zero point, if it is correct, then the icon “
⊗
” before
“
POWER
RESUME
”
in the “OTHER MANAGEMENT” will be changed into “
⑥
”.
2. If manually setting frame zero point, the icon “
⊗
” before
“
POWER RESUME
”
in the
“OTHER MANAGEMENT” will be not changed, and it still be “
⊗
”.
12-8 Setting the Machine Parameters
Operation:
(1)
Press "
" key under the embroidery preparation status and the following menu will
appear:
OTHER MANAGEMENT
⊗
SET DESIGN PARAS
②FRAME TO POINT (OPTIONAL)
③DESIGN RANGE,S OPERATIONS
④OFFSET
⑤SET POWER RESUME
⑥POWER RESUME
⑦SET MACHINE PARAS
⊗
COMPENSATION
⑨中文/ENGLISH/SPANISH
ARROW：MOVE， ENTER：CONFIRM
⑩TO SET CYCLIC EMB.
(2)
Press "
"
、
"
" or digital key "7" to move the cursor to "SET MACHINE PARAS",
and then press "
" key.
(3)
The machine parameters are in 5 pages (you can press "
" or "
" key to turn
to other pages), which are as chapter 32. The parameters can be revised using "
", "
",
digital keys, "
" and "
" keys.
BECS-328 Computerized Embroidery Machine's Manual
57
