Chapter 12 Assistant Operation and Setting the Parameters
(4)
Press "
" to end the operation.
(5)
Press "
" to go to the main picture.
12-9 Compensating of Satin Stitches
This operation is able to search automatically the satin stitches of the assigned pattern and
carry out compensation as required, thus obtaining a widening or narrowing result of satin
stitches. After compensating of satin stitches, a new pattern will be created but the source
pattern keeps unchanged.
Operation: (in embroidery preparation status)
(1)
Press "
" key, the menu appears as following:
OTHER MANAGEMENT
①SET DESIGN PARAS
②FRAME TO POINT (OPTIONAL)
③DESIGN RANGE,S OPERATIONS
⊗
OFFSET
⑤SET POWER RESUME
⑥POWER RESUME
⑦SET MACHINE PARAS
⑧COMPENSATION
⑨中文/ENGLISH/SPANISH
ARROW：MOVE， ENTER：CONFIRM
⑩TO SET CYCLIC EMB.
(2)
Press "
"
、
"
" or digital key "8" to move the cursor to "COMPENSATION", and
then press "
" key.
(3)
Select the source pattern according to the prompt.
(4)
Input the X and Y compensation value, which ranges from -0.2 mm to +0.3 mm.
(5)
Input the number of destination pattern.
(6)
Wait a moment, the new destination pattern will be created.
(7)
Press "
" to go to the main picture.
(8)
During the input design process, the compensated design can be input to the memory
directly by the prompt.
12-10 Chinese/English/Spanish
Please read the related part in chapter 11.
BECS-328 Computerized Embroidery Machine's Manual
58
