Chapter 13 Management of Pattern in Memory
DESIGN MANAGEMENT
①SELECT DESIGN FOR EMB.
②SHOW MEMORY DESIGN
③DISK INPUT
④COPY
⑤EDIT
ARROW:MOVE, ENTER:CONFIRM
⑥DELETE
⑦DIVIDE
⑧COMBINE
⑨PACKED DESIGN
⑩CLEAR ALL
(2)
Press "
"
、
"
" or digital key"8" to move the cursor to "COMBINE", and then
press "
" key.
(3)
Press "
"
、
"
", "
" and "
"key to select the first source pattern, and then
press "
" key.
(4)
Press "
"
、
"
", "
" and "
"key to select the second source pattern, and
then press "
" key.
(5)
According the prompt, input the distance between the end stitch of first pattern and
the beginning stitch of second pattern.
(6)
Input the number of destination pattern.
(7)
The computer does the splicing, and then will go to the design management menu.
(8)
Press "
" or "
" to end the design management.
13-9 Editing the Packed Pattern
The packed pattern means a pattern group packed from several (less than 100) normal
patterns in memory after setting parameters, which is intended for continuous embroidery
automatically.
Operation:
(1)
Press "
" key, the computer shows the design management menu as follows:
BECS-328 Computerized Embroidery Machine's Manual
64
