Chapter 13 Management of Pattern in Memory
(2)
Press "
"
、
"
" or digital key"9" to move the cursor to "PACKED DESIGN", and
then press "
" key.
(3)
The lower side of screen prompts you to enter the number of packed pattern. Input
“0” for abandoning editing operation, or input a non-existent number of pattern for creating a
packed pattern, or input an existent packed pattern for editing it. Whereas input a number of
existent normal pattern in memory, then you must repeat the input.
(4)
Enter the menu of editing packed pattern:
DESIGN MANAGEMENT
①SELECT DESIGN FOR EMB.
②SHOW MEMORY DESIGN
③DISK INPUT
ARROW:MOVE, ENTER:CONFIRM
SERIES: 1
④COPY
⑤EDIT
⑥DELETE
⑦DIVIDE
⑧COMBINE
⑨PACKED DESIGN
⑩CLEAR ALL
①DESIGN No: 0
②DIRECTION: P
③ROTATE: 0
PAGE:OTHERS, ESC:RETURN
④X-SCALE: 100
⑤Y-SCALE: 100
You must input the following parameters for each packing normal pattern: number of
pattern in memory, design direction, angle of rotation, X magnification, Y magnification, X
distance relative to the first pattern and Y distance relative to the first pattern.
Pressing "
" and "
"key, you can set several patterns. After completion, press
"
" key to store the packed pattern and return to the design management. Or press "
" key
and decide whether you save the packed pattern, then return to the design management.
(5) Press "
" or "
" to end the design management.
BECS-328 Computerized Embroidery Machine's Manual
65
