Chapter 14 Edit of the Pattern in Memory
8 : stop
9 : towel embroidery
According to the above, the character of stitch and the values of X and Y can be chosen
by pressing digital key directly (If X or Y is negative, press "
" key to change into positive
number, then press digital key.), and then press "
" key.
When the cursor move to the next line, it shows one stitch has been edited over.
Press "
" key continuously, then the screen will display:
0
＋０ ＋
0
0
＋
0
+0
0
＋０ ＋
0
0
＋
0
+0
0
＋０ ＋
0
0
＋
0
+0
… … …
…
Input the value you need to the corresponding position in each line, and press "
" key.
Then the stitch number displayed on the bottom of the screen is the stitch number has been
edited. After editing press "
" key and select "
⑤
", then press "
" key. The new pattern has
been edited over.
1.
Modifying a stitch
You can use "
", "
", "
", "
", "
" and
“
”、“
”
keys to move the
cursor, and use digital key to input numeral. It is necessary to point out that the range of X
and Y values of stitch length is
−
127 ~ +127. In case the input value is out of the range, the
machine will not confirm this entry. For instance, when changing “+126” to “+63”, first
move the cursor underneath “+”, then press "
", "6" and "3" keys.
2.
Deleting a stitch
Use "
", "
",
“
”、“
”
keys to move the cursor underneath the stitch to be
BECS-328 Computerized Embroidery Machine's Manual
69
