Chapter 18 Initialize the System Parameters during Electrifying
Chapter 18
Initialize the System Parameters during Electrifying
If some data in the system is illegal by rare chance, which is caused by outside
interference or by software bugs, the machine may not work after power-on. To solve this
problem, you can initialize the system parameters during electrifying as following:
Operation:
(1)
Press and hold "
" key, and turn on the power of machine.
(2)
The system initializes the system parameters and gives a sound, and release off "
"
key, the machine will start working.
BECS-328 Computerized Embroidery Machine's Manual
81
