Chapter 23 Adjust the Machine’s Braking(for New Machine)
Chapter 23
Adjust the Machine's Braking (for New Machines)
23-1 Summary
This function is designed for adjusting the braking control parameters, so as to let Dahao
computer suit different embroidery machines. Moreover the mechanic parts may change a little
with time, this function can let the Dahao computer and mechanic parts work together better.
23-2 Setting Parameters "SET BRAKE PARA." and "MAIN MOTOR PARA."
23-2-1 Setting the Parameter "SET BRAKE PARA."
This is to adjust the stop position of main shaft. If the stop position is less than 100 degree,
increase the parameter value. If the stop position is larger than 100 degree, decrease the value.
The range of the parameter value is form 0 to 30.
Operation:
(1)
Press "
" key and the following menu appears:
OTHER MANAGEMENT
⊗
SET DESIGN PARAS
②FRAME TO POINT
③DESIGN RANGE,S OPERATIONS
④OFFSET
⑤SET POWER RESUME/ZERO POINT
⑥POWER RESUME
⑦SET MACHINE PARAS
⊗
COMPENSATION
⑨中文/ENGLISH/SPANISH
ARROW
：
MOVE
，
ENTER
：
CONFIRM
⑩TO SET CYCLIC EMB.
(2)
Press"
" or "7" to select "SET MACHINE PARAS" and then press "
" key.
(3) Turn the page until the following menu appears:
BECS-328 Computerized Embroidery Machine's Manual
88
