Chapter 22 Setting the Cyclic Embroidering
Chapter 22
Setting the Cyclic Embroidering
When the machine is set into the cyclic embroidering, the computer will make the frame
return to the starting point and the machine will start embroidering the pattern another time
without pulling the bar after the machine has finished embroidering the pattern one time.
This setting will increase the productivity of embroidering.
Operation of setting or canceling of the cyclic embroidering:
(1)
Press "
" key, the menu appears as following:
OTHER MANAGEMENT
⊗
SET DESIGN PARAS
②FRAME TO POINT (OPTIONAL)
③DESIGN RANGE,S OPERATIONS
ARROW：MOVE， ENTER：CONFIRM
④OFFSET
⑤SET POWER RESUME
⑥POWER RESUME
⑦SET MACHINE PARAS
⊗
COMPENSATION
⑨中文/ENGLISH/SPANISH
⑩TO SET CYCLIC EMB.
(2)
Press "
","
" or digital key "0" to move the cursor to " TO SET CYCLIC EMB.",
and then press "
" key.
(3)
If the machine is not in the cyclic embroidering, the computer will change it to cyclic
embroidering and the icon "
" will appear. Otherwise, the machine will be changed into
non-cyclic embroidering and the icon "
" will replace the former icon "
".
(4)
The computer will turn to the main picture.
BECS-328 Computerized Embroidery Machine's Manual
87
