Chapter 25 No Output of the Pattern in Memory
Chapter 25
No Output of the Pattern in Memory
25-1 Summary
The function will prevent the pattern in memory from being copied illegally. In case the
user of machine has set a password for "NO OUTPUTTING DESIGN", the other man can not
execute the operation of "OUTPUT (DSB)" in disk management menu. If the user want to do
the operation, he must cancel the password for "NO OUTPUTTING DESIGN".
25-2 Setting a Password for "NO OUTPUTTING DESIGN"
Operation:
(1)
Press "
" key, and then press "
" key, the menu appears as following:
OTHER MANAGEMENT
①HI-SPEED DESIGN
②COMPILE PACKED DESIGN
③COMPILE EMBROIDER. DESIGN
ARROW：MOVE， ENTER：CONFIRM
④FRAME TO MAKE DESIGN
⑤ADD PATCH CODE TO DESIGN
⊗
ADJUST BRAKE(OPTION)
⑦TO MAKE TRUE DESIGN RANGE
⑧TO SET ALL HEADS PATCH
⑨TO LET NEEDLE DOWN AND MOVE FRAME
⑩NO OUTPUTTING DESIGN
(2)
Press "
"
、
"
" or digital key "0" to move the cursor to "NO OUTPUTTING
DESIGN", and then press "
" key.
(3)
Press "
" key to confirm the operation, or press other key to give up it.
(4)
Input a 4-digital password (except for "0", "00", "000", "0000"), press "
" key to
finish.
25-3 Canceling the Password for "NO OUTPUTTING DESIGN"
Having set a password, you can do the steps in section 25-2 and input the password to
cancel it.
In addition, the computer will cancel the password automatically by executing of the
operation of "CLEAR ALL" in design management menu.
BECS-328 Computerized Embroidery Machine's Manual
92
