Chapter 12
Taping Embroidery
Owner’s Manual of BECS- A15 Computerized Control System
95
2.
E axis
According to the difference in motor and the equipment of proximity switch for
positioning the origin, E axis devices can be divided to the following types:
1)
Driven by stepping motor separately, without proximity switch for positioning origin
2) Driven by stepping motor collectively, with proximity switch for positioning origin
3) Driven by stepping motor collectively, without proximity switch for positioning
4) Driven by servomotor, with proximity switch for positioning origin
3.
Clamp foot axis
The working progress of the special clamp foot is shown at below: (The clamp foot
working height is the distance of the foot’s movement at every stitch. The clamp foot rising
height is the foot’s moving distance from the bottom to the upper point at non-embroidery
mode. And it’s also called the clamp foot limited height.)
