Chapter 2
Embroidery Guide
Owner’s Manual of BECS- A15 Computerized Control System
17
V.
Manual Operation
1.
Manual Thread-trimming:
When the machine stops, press
in the main interface to display a
hint window, where user can press “Trim Upper&Bobbin Thread” to trim threads,
or click “Trim Bobbin Thread” to trim the bobbin thread only. Press
to
quit the thread-trimming operation.
2.
Manual Frame-Moving:
When the machine stops, press direction keys (
,
,
,
)
to move frame along the corresponding direction. Press the two neighboring keys at
the same time to move the frame in the direction of the angle bisector.
is
the speed key for manual frame-moving. Press to shift between
(high
speed) and
(low speed).
3.
Clear the Frame Coordinates
When the machine stops, press
to clear the XY displacements displayed
in the main interface. The function can be used with manual frame-moving.
4.
Manual Color-Changing
When the machine stops, press
in the main interface to enter manual
color-changing interface. Then click the needle number for color-changing, and the
machine head will automatically move to the corresponding needle position.
Please note: if the user wants to automatically save the order of the manual
color-changing, user should operate it in the manual color-changing interface on the
