Chapter 5
Settings of
Embroidery Parameters
38
Owner’s Manual of BECS- A15 Computerized Control System
Note: the number, name and current value of each parameter are displayed in the
parameter list window.
5.1
Procedure for Setting General Parameters
The setting procedure is similar for each general parameter. You can follow the guide of
this section to set all parameters.
1.
Select Parameter Type
User can use the keys at the bottom of the screen (parameter type key and page key) to
look for the parameter.
If you want to modify the number of needles whose parameter number is D01, press
to find machine configuration parameter and the its parameter list will be displayed.
2.
Press the parameter to be set and input the new value by the number keys.
