Chapter 6
Memory Pattern
Management
48
Owner’s Manual of BECS- A15 Computerized Control System
6.6
Create Outline Pattern
This operation can generate a new pattern based on the outline of the designated pattern.
1.
Press
to enter memory pattern management interface.
2.
Select a pattern in the memory pattern image display area.
3.
Press
to enter memory operation selection interface.
4.
Press “Create Outline Pattern” to enter the operation interface.
5.
User can press to input new pattern number and name instead of default ones.
6.
Press
to create the outline pattern and return to pattern operation
selection interface. Press
to quit the creating operation and return to pattern
operation selection interface.
6.7
Create High-speed Pattern
This function can be used to devide long stitch into short ones, so as to prevent speed
reduction due to long stitches.
1.
Press
to enter memory pattern management interface.
2.
Select a pattern in the memory pattern image display area.
3.
Press
to enter memory operation selection interface.
4.
Press “Create High-speed Pattern” to enter the operation interface.
5.
User can press to input new pattern number and name instead of default ones.
6.
Press
to create the high-speed pattern and return to pattern operation
selection interface. Press
to quit the creating operation and return to pattern
operation selection interface.
6.8
Divide Pattern
This operation is to divide one pattern into two new patterns.
