Chapter 6
Memory Pattern
Management
52
Owner’s Manual of BECS- A15 Computerized Control System
4.
Press “Create Combined Pattern” to enter the operation interface.
The combined ID shows the current pattern number and how many patterns the combined
pattern is composed of. Display form is “pattern number (the total amount of patterns)”.
5.
Set the parameters of the first pattern, including pattern number, scaling ratio,
rotating angle, pattern direction and priority mode. Please refer to Chapter 4 for details of
the settings.
6.
Press
to set several patterns for packing. And press
to go back to
change the parameters of combined patterns.
If the current pattern is not the first of the combined pattern, user need set the interval
between it and the first pattern. Please refer to Chapter 4 for details of inputting parameters.
