Chapter 10 About JF Sequin Embroidery
78
Owner’s Manual of BECS- A15 Computerized Control System
a) Click
or
to select sequin mode and click
to confirm. Sequin
names are A, B, C and D. If all these four sequins are included, A will be on the top, then
B, C and D.
b) After that, press
to confirm the sequin-feeding mode. Then the system will
ask user to input the number of sequins fed. Click the number keys to input the number
(Range: 0~9999). If a sequin group is only used for one stitch at the embroidery cycle, user
will need to input “1” and then press
.
c) Click
or
until you see “END” in the blank or the feeding number
becomes “0”. Press
to finish the setting.
For instance, if the current sequin mode is A2ABCD1CD1, the design will be like the
one at below:
8.
Save
When you finish the edition, click
to save the design.
