Chapter 12
Taping Embroidery
92
Owner’s Manual of BECS- A15 Computerized Control System
In the main interface, press
“
” to enter into color changing interface, and then
press the key
(zigzag head) to change zigzag embroidery mode:
Press the corresponding icon to select the very zigzag embroidery mode, if you don’t want to
change, and then press
to exit. After confirmation of the embroidery mode and the
setting of color-changing order, the system will display as below:
12.4.2.
M Axis Operation of Special Embroidery
The operations about M axis contain “M axis to be ready”, “M axis to cycle” and “M axis to
turn”, which are all in the Assistant Functions. In the main interface, you can click
to enter into the “Assistant Operation” interface. Turn the page, then you can see the
parameters “M axis to be ready”, “M axis to cycle” , “M axis rotate left manual” and “M axis
rotate right manual” displayed in order..
（
1
）
Return M Axis to Working Point
