Chapter 3
U Disk
Management
Owner’s Manual of BECS- A15 Computerized Control System
25
The system loads the data from the U disk and user can check details of the pattern,
scaleup/down the pattern, move or make analog display of the pattern. For more information,
please refer to section 6.3.
3.3
Pattern Input
To input patterns within the U disk to the machine’s memory, user need select the pattern
files to be inputted, and then input the number and name for the patterns to be saved in
memory.
1.
Select pattern files of the U disk;
2.
Press
and the system will require input of pattern number and name;
3.
Input the pattern number and name to be saved in memory;
