Chapter 6
Memory Pattern
Management
Owner’s Manual of BECS- A15 Computerized Control System
51
5.
User can press to input new pattern number and name instead of default ones.
6.
Press “X Interval” to input the value. Press “Y Interval” to input the value.
7.
Press
to combine patterns and return to pattern operation selection
interface. Press
to quit the combining operation and return to pattern operation
selection interface.
6.11
Create Combined Pattern
The combined pattern means a pattern group combined from several certain (less than 99)
memory patterns after setting their parameters. The combined pattern is set as automatic
continuous embroidery. To embroider a combined pattern, user need return to the memory
pattern management interface after creating or editing the combined pattern, where user can
select the combined pattern, and then after embroidery confirmation, press start to embroider.
1.
Press
to enter memory pattern management interface.
2.
To edit existing combined patterns, select a combined pattern; to create a new
combined pattern, just follow the instructions below.
3.
Press
to enter memory operation selection interface.
