Chapter 12
Taping Embroidery
Owner’s Manual of BECS- A15 Computerized Control System
93
Press the key “M axis to be ready” and click
on the dialogue window to let the
M axis back to the working point, click
to exit.
（
2
）
Return the M-axis to the Origin Point (Step Moving)
Press the key “M axis to cycle” and click
on the dialogue window to let the M
axis rotate to the “Zero point”, click
to exit the operation.
（
3
）
M axis rotate left manual
Press the key "M axis rotate left manual" to let the M axis rotate to the left. It will rotate
18° left once you click the button. After 20 times click, it will return to its origin;
(4) M axis rotate right manual
Press the key "M axis rotate left manual" to let the M axis rotate to the right. It will rotate
18° right once you click the button as well. After 20 times click, it will return to its origin.
12.4.3.
Operations of Clamp Foot
In the main screen, click
to enter into the “Assistant Embroidery Operation”
screen, select to
“
Nipple up
”
,then press “
”to lift the clamp foot, select “
”to
exit.
In the main screen, click
to enter into the “Assistant Embroidery Operation”
screen, select to
“
Nipple down
”
,then press “
”to lift the clamp foot, select “
”to
exit.
12.5
Debugging Special Embroidery
Debugging special embroidery mainly includes Zigzag swing to its origin and test of
clamp foot action. In the main screen, click
to “Machine Test” and then click “Taping”
to have access to the screen of machine test.
1.
Zigzag rod to 100
