Chapter 11 D Type Sequin Embroidery
Chapter 11
D Type Sequin Embroidery
11.1 Brief Introduction on Sequin Embroidery
Sequin embroidery is composed of sequins and threads. We choose those hard materials
with smooth surfaces as the sequins. Embroidery works will be shining with these sequins
attached. Design with Sequin codes has its own way of designing.
D type multi-sequin embroidery is divided into two groups: one is normal multi-sequin
design, made by normal design making method. The other one is special multi-sequin design
made by normal design software with special making method attached.
For normal one, you should set sequin mode when you modify the color-changing order.
Special multi-sequin design can be directly embroidered after modification of color-changing
order.
Meanwhile, the machine can automatically change normal design to special design during
the process of design import. The special design saves all the sequin of normal design as sequin
A. If you want further modification, you can use “sequin edit” to modify.
Note: see appendix 4 for detailed design making rules.
I.
Scope
This system applies to sequin embroidering control system which combines normal
embroidering mechanism and sequin sending mechanism.
II.
Features and Functions
1.
Two sending sequin modes: Wheel and Lever;
Wheel: the core part is a wheel-like device in the whole mechanism. Its operating
principle is to wheel continuous towards one direction to send sequins into position.
Lever: the core part is staff linkage. Its operating principle is to move back-and-forth to
send the sequins into position.
2.
Sequin mending and sequin sending mechanism are two independent actions;
3.
Delivering a sequin by operating either manual separated head or collective;
4.
Display working status separated head;
5.
Type of sequin sending and angle can be changed by operating on the control panel.
108 BECS-A18/A58 computerized embroidery machine owner’s manual
Summary of Contents for BECS-A18
Page 2: ......
