Chapter 11 D Type Sequin Embroidery
Input new design number and name, then click
to save edited sequin
design, or click
to unsave.
11.5 Parameter Setting about Multi-Sequin Embroidery
In this chapter, we will introduce how to adjust sequin device and parameter adjusting in
multi-sequin embroidery.
Select
in other functions screen to enter parameter management screen, then select
parameter setting.
1. Speed for Sequin R(L):
The parameter is to set the max speed during normal embroidering.
Note: the maximum speed of flat embroidery should be higher or equal to speed for
sequin embroidery.
2. Auto start for sequin:
When the setting is “Yes”, system will start embroidering sequin automatically.
When the setting is “No”, machine needs manually start.
3. Time of Sequin Action:
This is to set the time period from sequin device goes down to embroidering (0-15, the
default value is 2). If the sequin device is controlled by valve, use the default value; if it is
114 BECS-A18/A58 computerized embroidery machine owner’s manual
Summary of Contents for BECS-A18
Page 2: ......
