Chapter 11 D Type Sequin Embroidery
⑥
click
or
till you see “C”, then click
to confirm;
⑦
click digital key “4” and click
to confirm;
⑧
click
or
till you see “AC”
，
click
to confirm;
⑨
click digital key “6”, click
to confirm;
⑩
use
or
till you see “END”, and click
to confirm.
（
5
）
Directly click digital key“1”, then click
to complete setting of
color-changing.
Note: if it is single sequin, directly click needle number.
11.7 Manual Operation of Sequin Embroidery
It has two ways of operation, collective operation and separated operation.
1. Collective Operation
：
Collective operation can be divided into three parts: “sequin start”, “sequin end” and
“send sequin”.
（
1
）
In the main screen, click
and “special embroidery operation” one by one, then
select “sequin start” to let all the clamp feet down;
（
2
）
In the main screen, click
and “special embroidery operation” one by one, then
select “send sequin”, once you make a click, the activated machine heads will all send a
sequin
（
with clamp foot down
）
;
（
3
）
In the main screen, click
and “special embroidery operation” one by one,
then “sequin end” to lift all the clamp feet.
2. Separated operation
：
Thread break switch is embroidery switch. When thread break switch is at the
down side, neither flat embroidery nor sequin embroidery is available;
Thread break warning lamp is mounted on the sequin sending device, which
120 BECS-A18/A58 computerized embroidery machine owner’s manual
Summary of Contents for BECS-A18
Page 2: ......
