Chapter 13 Directions on Coiling, Taping and Zigzag Embroidery
13.2 The Key Technical Indexes
1. The sequence of flat embroidery head and special embroidery head: The default setting
is that first needle position is for special embroidery, the rest of neddles are for flat embroidery.
2. Speed limit for special embroidery: 300-600 rpm, unit: 10rpm.
3. Angle of M-axis rotated manually: 18
°
per step.
13.3 Embroidery Process
（
1
）
input special embroidery design, select design, make adjustment and edit.
（
2
）
change parameter, select color-changing order and decide embroidery mode.
（
3
）
check special embroidery head, make sure it runs well.
（
4
）
pull bar to embroider.
13.4 Related Parameter and Setting Mode
Click parameter setting key
→
.
1.
D28 special embroidery head interval:
Range: 10
～
600, index value: 150, 162, 166, 185, 200, 216, 225, 230, 240, 250, 270, 290,
300
If the set value is the index value, a “
*
”
will be marked in front of the number.
2.
D30 working height of special embroidery clamp foot: 0
～
90
The clamp foot working height indicates the lift up height of the clamp foot when
embroider every stitch.
3.
D40 adjust clamp foot limit: 0
～
250
The clamp foot limit indicates the max height of clamp foot when embroidering.
4.
B16 adjust the lowest point of clamp foot : 0
～
255
This parameter helps to adjust the lowest working point of clamp foot.
5.
D31 Rod Pos. of Zigzag: Left/ Right
The rod position indicates where the swing locates (left or right) when M axis is in origin.
The setting should be in accordance with mechanical position.
6.
C38 Swing range in Zigzag:
（
-10.0
～
-0.2
，
+0.2
～
+10.0
）
The swinging scope of the embroidery frame in Zigzag sewing: -9.0--+9.0; operation ditto.
The parameter is for Z5 stitching functions and applies to thick cords. For a thick cord, the Z5
embroidering is to move the frame to add to the swinging scope of the lever. The parameter’s
BECS- A18/A58 computerized embroidery machine owner’s manual
129
Summary of Contents for BECS-A18
Page 2: ......
