Chapter 13 Directions on Coiling, Taping and Zigzag Embroidery
Click the key “M axis to cycle” and click
on the dialogue window to let the M
axis rotate to the “zero point”, click
to exit.
（
3
）
M-axis rotated manually
Click the key “M axis to return” and click “turn to left” on the dialogue window to let the
M axis rotate to the left. It will rotate 18° left once you click the button. After 20 times click, it
will return to its origin; while click “turn to right” on
the dialogue window to let the M axis
rotate to the right. It will rotate 18° right once you click the button. After 20 times click, it will
return to its origin. Click the key
to exit.
13.5.3.
Operations of Clamp Foot
In the main screen, you can click
to enter into the “Assistant Operation” screen,
select “operation for special embroidery” to show the special embroidery operation screen.
Click the key “lift up clamp foot” and select
to lift the clamp foot, select
to
exit.
Click the key “lay down clamp foot” and select
to lift the clamp foot, select
to exit.
13.6
On Debugging Special Embroidery
Debugging special embroidery mainly includes Zigzag swing to its origin and up/ down of
clamp foot. In the main screen, click
to enter into “Other Functions” screen, after that,
click “test operations for machine”.
1. Sway Zigzag rod
Click the key “Sway Zigzag rod”, after seeing the dialogue window, pull bar to let all the
swings act once. Click
to exit. Users can adjust swing angle by using this function.
2. Up/ down of Clamp Foot
Click the key “lift up clamp foot”, after seeing the dialogue window, pull bar to let all the
clamp feet act once. Pull again to let them act again. Click
to exit.
13.7
Mechanical Category and Driving Mode Choice of Special Embroidery
Machines
Taping machines have three moving parts in the sense of mechanics. We define them as M
axis, E axis and clamp foot axis. M axis rotates a certain degrees every stitch to trace the stitch,
which ensures cords or tapes always in front of needle movement. E axis swings once every
one or two stitch to make the Zigzag embroidery. Clamp foot axis is for lifting and lowering
134 BECS-A18/A58 computerized embroidery machine owner’s manual
Summary of Contents for BECS-A18
Page 2: ......
