Chapter 2 Embroidery Guide
No.
Display
Name
Description
4
When pulling the bar for stop, the frame directly
moves to the actual position of the current stitch
count. When the machine stops, click this key to
switch to the normal embroidery status
.
Back to origin
When the machine stops, click it, the frame will
automatically return to the start point of the
current design.
Back to stop point
When the machine stops, click the key “Manual
Frame-moving” to move the frame (e.g. in case
of patching). Then click this key and the frame
will automatically return to the stop point of the
current design.
Turn the main
shaft at 100°
manually
If the main shaft doesn’t arrive at 100°
;
click the key and then the main shaft will arrive
to this position
.
Manual Trimming
After machine stops, click this key to do manual
trimming (Trim up-lower thread and Trim
bottom thread).
Manual
Color-changing
When the machine stops and the main shaft
reaches the set position (
), click it to enter
the manual color-changing screen and then click
the corresponding needle number to change
color.
Change design
direction
Press this key to shift the design direction.
Memory Design
Management
Click it to enter the memory design management
screen, which includes “select design”, “disk
input”, displaying designs, creating new designs
and monogram operation.
Other Functions
Press this key to enter other assistant
management interfaces, like clock setting and
help.
Assistant
embroidery
operation
Design origin, needle stops down, offset point,
sequin, special embroidery, etc.
BECS- A18/A58 computerized embroidery machine owner’s manual
11
Summary of Contents for BECS-A18
Page 2: ......
