Chapter 4 Common Parameters and Color-Changing Order
No.
Display
Name
Description
5
Interchange needles
Open the needle interchanging screen and
set it.
Setting of needle
color
Select and set needle colors in the default
colors.
Help
Display the help menu.
6
Yes
Save the patching setting and return.
Exit
Drop out the color-changing screen.
7
Needle number
selection area
Select needle number here.
The design display area displays the designs which are under color-changing setting.
Design display will change with the setting at the same time.
Color-changing order display area shows color blocks, needle numbers and needle
colors.
Design display can be in parallel with the setting, inserting and deleting needle number,
which means users don’t need to wait for the end of design display to do the setting and
changing of color-changing order.
4.2.2.
Setting of Color-Changing Order
1.
Click
in the main screen to enter the color-changing screen.
2.
Input the needle numbers in order in the needle number selection area. The design
display in the design display area and the color list in the color-changing display area
will refresh with the input of each needle number.
3.
Click
to see if the input color-changing order is correct.
4.
To change a needle number in the color-changing order, the user can click the
list to place the intended item to the current operation position, and then click the new
needle number.
5.
To insert a needle number in the color-changing order, click the order list to place
BECS- A18/A58 computerized embroidery machine owner’s manual
39
Summary of Contents for BECS-A18
Page 2: ......
