Chapter 6 Memory Design Management
6.4 Setting Design Parameter
Each design has its setting of color-changing order and normal parameters such as
scaling up/down and repetition, which can be checked and set here.
1.
Click
in the main menu to enter the memory design management screen.
2.
Select the design in the memory design image area of the memory design
management screen.
3.
Click
.
If the selected design is the current embroidering design, the
embroidery parameter setting screen will pop up. Please read Chapter 5 for reference. If
the selected design is not the current embroidering design, the non-embroidery
parameter setting screen will pop up.
For the setting of normal parameters and color-changing, please also read Chapter 5.
After setting, click
to save the setting with the design for later use. Click
to
cancel the setting and return to the design operation choosing screen.
6.5 Deleting Memory Design
This is to delete one or more designs in the machine memory.
1.
Click
in the main menu to enter the memory design management screen as
follows.
52 BECS-A18/A58 computerized embroidery machine owner’s manual
Summary of Contents for BECS-A18
Page 2: ......
