Chapter 6 Memory Design Management
The design display area shows the design which is being set with patching. After setting
the patching point, the design will refresh and the result will show directly.
4.
Click
to move the list to the position for patching.
5.
If choose to move the frame out to the offset point, click the switch button of the
item list to select "Another Origin". If user chooses fixed range, user can click the
switch button to select "10 cm out of frame". After that, user can click the range setup
key
to select the range from -99 cm to 99 cm.
6.
Repeat step 4 and 5 to set all the patching positions of the design.
7.
Click
to save the patching information and return to the design
operation choosing screen. Click
to cancel setting and return.
6.10 Generate Design from Parameter
This is to change the setting of color-changing order and normal parameters such as
scaling up/down and repetition, which is attached to a specific design, so as to create a new
design.
1.
Click
in the main menu to enter the memory design management screen.
2.
Select the design in the memory design image area of the memory design
management screen.
3.
Click
to enter the design operation choosing screen.
4.
Click “Generate design from parameter” to enter its operation screen.
BECS- A18/A58 computerized embroidery machine owner’s manual
59
Summary of Contents for BECS-A18
Page 2: ......
