Chapter 6 Memory Design Management
5.
Click "Stain", "Jump" to very between satin stitch and jump stitch. Click the
manual frame-moving key to move the frame along the desired route. Click
at
every turning point to confirm the trace.
6.
Click
when editing completes. System will prompt to input the new
design number.
7.
According to the prompt, input the number of the new design (The computer will
provide a number for choice) and design name. Click
to create the new
design.
8.
Click
to cancel the setting and return.
6.13 Make True Design Range
This function is to create a new design according to the outline of the designated design.
1.
Click
in the main menu to enter the memory design management screen.
2.
Select the design in the memory design image area of the memory design
management screen.
3.
Click
to enter the design operation choosing screen.
4.
Click “Make True Design Frame” to enter its operation screen.
5.
If don’t use the default values, click the design number and design name and
change them.
62 BECS-A18/A58 computerized embroidery machine owner’s manual
Summary of Contents for BECS-A18
Page 2: ......
