Chapter 9 Letter Pattern Operation
106
BECS-D19 User’s Manual
8.
“Letter Width Adjustment”: increase or decrease the letter width.
9.
“Stitch Density”: the stitch interval of the generated letter pattern. The smaller the value,
the higher the density.
10.
“Letter Rotation Angle”: the rotation angle of each letter opposite to its own center.
11.
“Auto Color-changing”: whether to add color-changing code before each letter.
12.
“Display Hint Window”: used to set whether to display hint information during the
letter pattern adjustment.
After setting letter pattern parameters, user need press “
” to enter the interface to
“generate letter pattern”, in order to adjust letter pattern.
A.
The Interface to “Generate Letter Pattern”
As shown below, user can press
to shift among these three interfaces.
Usually, user need first set parameters such as arrangement, rotating angle, letter interval
and so on. And then, select one letter to adjust its arrangement parameter (by buttons at right
side of the screen).
Letter pattern display area: the central cross means coordinate, and the intersection is
origin (0, 0). The letters will arrange around the origin automatically.
B.
View and Document Operation
