Chapter 9 Letter Pattern Operation
108
BECS-D19 User’s Manual
according to its position at the arc (vertical to the arc) e.g.
.
“Radian Increase”: when letter string is arranged in arc, this key is used to
increase the radian of the arc, e.g.
.
“Radian Decrease”: when letter string is arranged in arc, this key is used to
decrease the radian of the arc, e.g.
.
“Wholistic Anti-clockwise Rotation”: anti-clockwise rotation of the whole letter
string, e.g.
.
“Wholistic Clockwise Rotation”: clockwise rotation of the whole letter string, e.g.
.
“Increase Letter Interval”: increase letter interval, e.g.
.
“Reduce Letter Interval”: reduce letter interval, e.g.
.
D.
Adjustment of Selected Letter
“Selection Switch”: switch the selected letter. User has to pick up a certain letter
and then he can carry out the edit. When there is a red “
＋
” in the center of letter, it means the
letter is selected, such as:
. As default, system will select all letters. After user clicks
“selection switch” key, system selects the first letter, then the next one by another click. After
user selects the last letter, clicking “selection switch” key will select all letters again.
Repeat clicking this key to make the same selection circulation.
“Enlarge Letter”: used to adjust the size of the selected letter. Pres “
” to
increase height, press “
” to decrease height, press “
” to increase width and press
