Chapter 11 Coiling, Taping and Zigzag Embroidery
116
BECS-D19 User’s Manual
Chapter 11 Instructions on Coiling, Taping and
Zigzag Embroidery
11.1 Function Introduction
1. Coiling function: This function is to wind core thread in a form of coiling. Left Coiling
(clockwise) and Right Coiling
(anti-clockwise) are both available in coiling
function, which is decided by the setting of parameters.
2. Taping function: this function makes use of rope or tape as embroidery material. It
includes taping 1
and taping 2
(blind embroidery).
3. Zigzag function: this function is to sew the core thread in the specialized stitch form on
the fabric. There are six stitches form saved in system: Z1, Z2, Z3, Z4, Z5 and Z6. Their icons
are as follows.
Z1 Z2 Z3 Z4 Z5 Z6
For convenience, Coiling, Taping and Zigzag embroidery are all called special
embroidery at below.
4. Flat embroidery head and special embroidery head can be switched automatically or
manually.
5. Coiling, Taping and Zigzag functions can be switched at will.
6. The presser foot of special embroidery can go up and down automatically or manually.
(This function is only for the machines installed with relevant apparatus.)
7. The speed limit of flat embroidery head and special embroidery head can be set
respectively.
8. Auto-saving of the M axis stop point at power-off: The machine can continue the work
from the stop point when the power recovers.
9. The trimming function of the special embroidery head (no trim\trim bobbin thread\trim
both the upper and bobbin threads)
10. The presser foot of special embroidery head can go up automatically before manual
frame-moving and go down before embroidery.
11. Zigzag embroidery lever can be tested manually.
11.2 Main Technical Specifications
1. The sequence of needle positions on flat embroidery head and special embroidery head:
this control system deems the first one as the special embroidery needle position, and the
needle position for flat/sequin embroidery are from the second needle to the end.
2. Speed of special Embroidery: 300~600rpm, by increment of 10r/m.
