Chapter 1 General Information
BECS-D19 User’s Manual
3
Caution
The power supply has over-currency protection function. There is a 3
minutes time lag before the function can be used again.
Maintenance and Inspection
Warning
If you need to open the machine cover, cut out the power supply first.
Due to the capacitance after power off, operator must wait for one
minute before opening the machine cover.
Caution
Circuit boards can be damaged by static. Non-professional technician
can not disassemble circuit boards.
Caution
If machine is inactive for a while, users must power on the machine
regularly (once in 2 or 3 days, more than an hour for each time).
Caution
If machine is inactive for a long time, users should have the machine
checked before power on.
Rejection
Caution
Rejection should obey the rules and regulations set by national
industrial electronic standards.
1.2 Main Features
1.
LCD Displayer
It’s easy to learn and its beautiful screen makes work a joy.
2.
Timing Turn-off of LCD Displayer
LCD will turn off automatically in case of no operation in 15 minutes (the time can be
changed in parameter setting). A touch of the screen or any key will reboot the LCD.
3.
Super-large Memory Capacity
The memory space reaches 2M and up to 800 patterns can be stored, which can satisfy the
demands of various users for memory space.
4.
Max. 2 Million Stitches for Single Pattern
Currently, the maximum number of stitches for single pattern is 2 million, with 1000 times
of automatic color-changing.
5.
Multi-task Operation and Free Task Shift
During embroidering, user can input&output patterns, change and prepare the patterns to
be embroidered, and modify certain parameters at anytime. At the same time, user can shift
among tasks freely just by pressing the task-shifting key.
6.
Separate Storage of Each Pattern’s Frequently Used Parameters and Color-changing Order
Frequently used parameters, color-changing (needle bar) order and needle bar colors of
each pattern can be stored separately. Work settings of each pattern will be recorded and user
can set and change the subsequent patterns while the previous pattern is under embroidering,
which will save time and improve work efficiency. What’s more important, this function is the
basis for the realization of centralized management via network.
7.
Grouping Management of Parameters
Parameters can be divided into groups based on their functions and embroidery types. The
system can also save and recover the parameters used by technicians at end-user and the
