Chapter 12 Instructions on Loop Embroidery
126
BECS-D19 User’s Manual
According to the current head type, system will hint to switch from flat embroider
head to looping embroidery head or vice versa.
（
2
）
Press “Enter” key to execute the switch. If in the main interface the head switch
key is displayed as
and the indicator of loop embroidery head is on, the head
has changed into looping embroidery head. If
is displayed, it is flat
embroidery head.
（
3
）
Press number keys to carry out manual color-changing function. If current head
is looping embroidery head, “1” means shuttle position a, “2” position b, “3”
position c, and so on.
（
4
）
When current head is looping embroidery head, press number keys to display the
window of “looping embroidery mode and needle bar height seletion”. Use the
right or left direction keys on the keyboard to switch between looping embroidery
stitch and chained embroidery stitch. Use the up or down keys on the keyboard to
change the needle height and improve the embroidery effect. 0, 1, 2, ……, 9
represents different needle height, and H represents off position, which can be used
to shut all heads automatically.
（
5
）
Press “Back” to exit. Embroidery machine will make corresponding changes
according to the set value of shuttle position, stitch type and looping needle height
and display the final results.
