Chapter 12 Instructions on Loop Embroidery
134
BECS-D19 User’s Manual
Operation:
Use left or right direction keys on the keyboard to move the red box to select
and then press up or down keys to select direction, angle, curve and rotation speed. Pull bar to
start test;
Press
to return to origin and press
to let H axis return to threading point;
Press “ESC” to exit.
12.5.6 Test Main Shaft of Chained Embroidery
The operation is the same with that of flat embroidery.
12.5.7 Test Main Shaft Encoder of Chained Embroidery
The operation is the same with that of flat embroidery.
12.5.8 Test Trimming Motor of Chained Embroidery
Operation: Use left or right direction keys on the keyboard to move the red box to select
and then press up or down keys to adjust the trimming angle and speed for test.
Pull bar to execute trimming.
Press
to display the following interface:
