Chapter 12 Instructions on Loop Embroidery
BECS-D19 User’s Manual
137
Use “frame-moving speed” key on the keyboard to shift the corresponding relationship
between current needle with flat embroidery head and loop embroidery head. When set as flat
embroidery head, the color-changing setting is the same as that of normal flat embroidery
machine. When set as loop embroidery head, “1” on the keyboard represents shuttle position a,
“2” position b, “3” position c, etc.
After setting the shuttle position, the window of “looping embroidery mode and needle
height selection” is displayed, in order to select stitch type and needle height to realize ideal
effect. After setting, press “OK” on the keyboard to finish the color-changing setting.
After setting the embroidery mode and color-changing order, the following interface will
be displayed:
