Chapter 1 General Information
BECS-D19 User’s Manual
5
origin point and starts the same embroidery again after finishing one time. together with special
pattern-designing or repetition embroidery, work efficiency can be greatly improved.
20.
Pattern Compiling
(1) Create new pattern by editing parameters of selected pattern
User can edit the scaling up/down rate, rotation angle, embroidery methods like normal
repetition or partial repetition in order to create a new pattern. Such new pattern can be used for
embroidery, output or other operations.
(2) Edit combination pattern
User can edit an existing combination pattern to create a new one and the new pattern can
be used for embroidery, output or other operations.
21.
Letter Pattern
The system has 28 letter libraries. User can combine letters by various arrangements as
needed to generate letter patterns, which is very simple and esay.
22.
Pattern Edit
By this function, user may insert, modify or delete certain stitch at certain point. New
patterns can be created by this function too.
23.
Speed Adjustment
The highest speed for embroidery can be set in advance. During embroidery, speed will
change automatically when the needle interval changes.
24.
Thread Trimming
Thread trimming can be manually controlled or operates automatically at the end of
embroidery process or color changing.
25.
Thread Breakage Detection
In case of thread breakage or run-out of bobbin thread, machine stops and warning lights
start to blink.
26.
Color Changing
At the color-changing position, either it can be manually operated, or the system will
operate color-changing automatically according to the pre-set order.
27.
Special Embroidery
BECS-C16 has special embroidery functions (coiling, taping and Zigzag embroidery)
which can enrich the embroidery patterns.
1.3 Technical Specifications
1.
Maximum Number of Patterns Saved in Memory: 800
2.
Memory Capacity: 2M
3.
Screeen Resolution: 800*600
4.
Network Port Speed: 10Mbps
5.
Data Transfer Method: floppy disk, USB disk, network
6.
Control Precision: minimum stitch interval under control is 0.1mm
7.
Needle Range: 0.1mm~12.7mm
