Appendix 1 Parameter Setting List
140
BECS-D19 User’s Manual
Appendix 1 Parameter Setting List
No.
Parameter Name
Default
Range
Note
Scaling, Rotation & Repetition
A03
Pattern Direction
P
A02
Rotation Angle
0
0~89
Control the rotating angle of the
pattern.
A01
X-Y Scaling Rate
100/100
50%~200%
Control the scaling rate of the patter
at X-Y direction.
A06
Repetition Priority
X Prior
X Prior, Y Prior
A05
Repetition Mode
Normal
Normal, Partial
Temporarily unavailable
A07
X-Y Repetition Times
1/1
1~99
A08
X-Y Repetition Interval 0.0/0.0
-999.9~+999.9
A04
Priority Mode
Rotation
First
Rotation First,
Scaling First
Self-defined Parameters (Set according to Needs)
Assistant Parameters
B01
Return to Origin
Yes
No, Yes
B02
Whether to make cyclic
embroidery?
No
No, Yes
Whether to automatically repeat
embroidery at end. It often
coordinates with repetition or special
pattern.
B04
Whether to display
stitch number?
Yes
No, Yes
C02
Whether to skip empty
stitch?
No
No, Yes
If “Yes”, the machine will skip the
empty stitches (needle moving
without embroidering). If “No”, the
empty stitches won’t be skipped.
B13
Auto selection in case
of same color
Yes
No, Yes
Whether to start in the manner of
color-changing when the later needle
position is the same with the former
one in color-changing order.
C04
Save manual
color-changing
No
No, Yes
If “Yes”, manual color changing is
saved in the color-changing order.
After embroidery, the setting will
automatically change to “No”.
D15
Slow stitches after
patching
0
0~500
D16
Speed of slow stitches
after patching
Max.
80~Max.
C03
Stop to Color when
loading pattern
No
No, Yes
Change stop codes into
color-changing codes at loading
