Chapter 2 Operation Guide
BECS-D19 User’s Manual
7
No.
Name
Description
1
LCD
This area displays the operation interface.
2
Function
Selection
Press the function keys within this area to select functions.
(Note: If you press the key twice without interruption by
any other operation, the system will enter or exit the
corresponding function in the main screen area, except the
page key.)
3
＋
/
－
Shift
Select negative or positive number.
3
Assistant
Operations
Include such operations like pattern origin, needle stop at
down position, start elsewhere, sequin, quilting, special
embroidery
3
Task Shift
If user opens several interfaces, use this key to shift among
these interfaces in order.
3
Speed
Adjustment
Press
/
to reduce or increase the current
embroidering speed respectively.
3
Manual Frame
Movement
Operate by pressing direction keys. Combination of
direction keys is permitted during manual movement (press
the nearby keys to move the frame along 45 degree of the
included angle between two directions).
3
Manual
Frame-moving
Speed Shift
Press this key to shift between high speed (
) and low
speed (
).
3
Confirm
Press this key to confirm certain operation.
3
Confirm/Release
Embroidery
Under ready status, user can make various preparations,
such as selecting pattern for embroidery, setting pattern
parameters, etc. before confirmation. Then press this key to
