Chapter 2 Operation Guide
12
BECS-D19 User’s Manual
No.
Display
Name
Description
Reference
3
Normal
embroidery
System is now in normal embroidery
status. When you pull bar to start
embroidery, the main shaft rotates and
frame moves along the pattern trace.
Pull bar to go back, and machine will
idle back at low speed. When machine
stops, press this key to shift to low speed
idling
.
Low-speed
Idling
System is now in high speed idling
status. When you pull bar to start
embroidery, main shaft will not rotate
and the frame will move along the
pattern trace. When you pull bar to go
back, main shaft will not rotate and the
frame will move back along the pattern
trace. When machine stops, press this
key to change to high-speed idling
status
.
High speed
idling
System is now in high speed idling
status. Pull bar but main shaft and frame
don’t move and stitch number increases;
pull bar to stop, the frame goes to the
real position of the current stitch. Pull
bar to back, main shaft and frame don’t
move. Stitch number decreases as well.
Pull bar to stop, the frame goes back to
the real position of current stitch. When
machine stops, press this key to change
to Embroidery Status
。
3
Embroidery
preparation
status
In embroidery preparation status, you
can make various preparations, such as
to select pattern, set parameter, etc.
Press this key and confirm, then
machine status is changed from
preparation status
to confirmation
status
.
