Chapter 2 Operation Guide
16
BECS-D19 User’s Manual
2. If the pattern’s starting point has been saved, the hint “Move frame to start point”
will display after entering the main screen. Press “
” and the frame will automatically
return to the start point.
C. Assistant Operation
After selecting the pattern for embroidery, the system will enter the main interface, where
user can make the assistant operation as needed before embroidery.
1.
Set repetition, rotation, scaling and color-changing – press in oder
to
enter the operation interface of pattern parameter and color-changing order.
2.
Set applique embroidery -
to enter pattern management interface, where user
can press
to set applique following the hints.
3.
Check the border, move freely along the border, embroider aong the boarder,
embroider a cross, embroider a line, embroider the pattern outline – press
to enter
pattern border interface.
4.
Automatically search pattern origin – press
to enter assistant embroidery
interface. Please note: this function is to locate the pattern in the center of the frame as
preset by soft limit. To set soft limit area, press
to enter other assistant
management operation.
5.
Save pattern origin – in embroidery confirmation status, press
to enter
