Chapter 2 Operation Guide
20
BECS-D19 User’s Manual
then select the corresponding function item to enter the operation menu.
G. Embroidery Release
When the machine stops, press
to display the hint window. Choose “
” to change
(embroidery confirmation) into
(embroidery release).
2.8 Normal Embroidery, Returning and Patch Embroidery
In embroidery confirmation status (the icon
appears), push the switch of machine
head (which need perform normal embroidery) to the normal embroidery mode, and push the
switch of machine head that needn’t embroider to the down position, and then pull the
operation bar to right and release it to let the machine start normal embroidery. (When you pull
the bar to the right end and don’t release it, the machine will embroider at low speed.) During
the embroidery, pull the bar to left, the machine will stop.
After the machine stops, pull the operation bar to left and the frame will return to its last
position along original path. Pull the bar one time, the frame returns one stitch. Pull the bar
continuously and the frame will return one stitch after another continuously. After the frame
returns 10 stitches continuously, the frame can return continuously even when you release the
bar. (This may be different for different machine types). When the frame returns continuously,
pull the bar to left again, the frame will stop returning.
The aim for returning is usually to perform patch embroidery. After the returning stops,
push the switch on machine head that need perform patch embroidery to go to the patch mode,
and then pull the operation bar to right and the machine head will start patch embroidery while
other heads remain inactive. When the frame goes to the point from which the frame returns,
other heads whose switches are in normal embroidering mode will start to embroider.
2.9 Relationship between Normal Embroidery, Idling and Positioning
Idling
Functions like idling, returning, etc. are intended for the convenience of patching.
Low-speed idling, high-speed idling or positioning idling can be used as needed in embroidery.
In the status of idling, the returning function also has low-speed idling returning, high-speed
idling returning or positioning idling returning.
In the main screen, you may press “
” (or “
”, “
”) to shift among “
”
(normal embroidery), “
” (low-speed idling) and “
” (high-speed idling).
After user sets low-speed idling
, the main shaft remains inactive when user pulls the
bar for normal embroidery, but the frame runs forward along the stitch trace. When user pulls
