Chapter 3 Disk Management
BECS-D19 User’s Manual
27
certain ratio. At the same time the pattern’s peripheral information and color-changing number
will be displayed.
Note: User can select more than one pattern for preview. For selecting more than one
pattern, please refer to chapter 3.3.
3.3 Single/Multiple Selection
Before preview, input and deletion of patterns, the target pattern has to be selected first.
The user can select one object or several objects at one time to improve efficiency.
1. Press “
” to select objects
By default setting, the first object in the page is selected while others are not selected.
Press “
” to select, and then the icon and word information of the selected
pattern will be showed within the blue square.
2. Single/multiple selection switch
When user selects the objects, the system is in single or multi-selection mode. In
single-selection mode, only one object can be selected and selecting another object will
automatically cancel the last selection. Press the switch key to shift between the two modes. In
multi-selection mode, user can select several objects. In the single selection mode the switch
key displays as
, while in the multi-selection mode it displays as
.
3. Select several objects for operation in order
In multiple-selection mode, user can press “
” to select the object and then
press “
” to confirm the selection, and repeat the same operation to make multiple
selections. If user need cancel any selection, move to the selected object and press “
”
again to cancel.
