Chapter 4 Memory Pattern Management
BECS-D19 User’s Manual
39
No.
Icon
Name
Description
pattern and pausing the drawing.
7
Speed Down
Decelerate the display.
8
Speed Up
Accelerate the display.
9
Window Display
Display the pattern to the full size in the
pattern preview area.
10
Real Size Display
Display the pattern in its actual size in the
pattern preview area.
11
Scale Down
Scale down the pattern picture in the pattern
preview area.
12
Scale Up
Scale up the pattern picture in the pattern
preview area.
1. Press
in the main interface to enter the memory pattern management interface.
2. Select a pattern in the pattern image area of the memory pattern management screen.
3. Press
in the memory pattern interface to open pattern preview interface.
4. Press
in the pattern preview area to control the pattern size and press
“
” to control the pattern display position. Press
to locate the pattern to
the center. Press
to control the pattern display speed. Press
to control
the pattern display and pause. Press
to automatically switch to halt for single step
pattern display. And press
to resume normal display. Press
to re-display the
selected pattern.
4.5 Copy Memory Pattern
1. Press
in the main menu to enter the memory pattern management interface.
2. Select intended pattern in the pattern image area of the memory pattern management
interface.
3. In the memory pattern management interface, press “
” to enter the operation
interface for copying memory pattern. At this time, system will automatically provide the
available smallest pattern number and default pattern name. If the user doesn’t want to change
them, go to step 6 directly.
