Chapter 4 Memory Pattern Management
42
BECS-D19 User’s Manual
4. Press “
” to delete pattern or press “
” to give up pattern deleting operation,
system will return to the pattern operation selection interface.
4.7 Applique Pattern Setting
System has two ways for appliqué embroidery: manual moving frame out and automatic
moving frame out.
Manual moving frame out: when meeting the stop code, the machine will stop
automatically. User needs move the frame to the proper position for appliqué with the manual
frame-moving button. Then you may press
and “
” to return to the stop point. At
last pull the bar for embroidery.
Automatic moving frame out has two ways: by moving frame to the offset point or by
setting the moving distance. The operation is as follows: firstly, set appliqué embroidery
function for the pattern. Then, when reaching the appliqué point, the machine moves to the
offset point (which has to be set) or move out according to the set distance. After appliqué,
pull the bar and the machine will automatically return to the stop point to continue
embroidery.
The following is how to set appliqué for the pattern:
1. Press
in the main interface, to enter memory pattern management interface.
2. Select the target pattern in the pattern image area of the memory pattern management
interface.
3. Press “
” to enter the operation interface for setting appliqué for the pattern as
